X-CHAIN

Professional protection for all chain types: X-Ring, O-Ring, Z-Ring, and standard.

X-CHAIN is a high-viscosity synthetic lubricant designed for those seeking maximum protection and cleanliness. Thanks to its advanced formula with EP (Extreme Pressure) additives, it guarantees deep and persistent lubrication, withstanding extreme stress and high speeds without flinging.

Why choose X-CHAIN?

• Ultra-Adhesive: Stringy consistency that doesn't drip or fling onto the rim, even at high speeds.
• Water-Repellent & Anti-Corrosion: Full resistance to water washout, oxidation, and weathering.
• Extreme Thermal Resistance: Maintains lubricating properties from -10°C to +180°C.
• Clean Formula: Clear and mineral oil-free; won’t stain swingarms, rims, or adjacent parts.

Technical Features & Benefits
X-CHAIN spray grease combines an initial fluid, penetrating phase to reach internal pins and rollers, with a subsequent transformation into a stable, uniform adhesive film.

• EP (Extreme Pressure) Technology: Protects the drivetrain from mechanical wear under heavy loads.
• Total Compatibility: Ideal for all sealed chains (O-Ring, X-Ring, Z-Ring) and standard chains for motorcycles, bicycles, and e-bikes.
• Professional Application: The precision straw allows for easy lubrication of hard-to-reach spots and vertical applications without waste.

Fields of Application
More than just motorcycles; X-CHAIN is a versatile lubricant for any mechanism under high stress:

• Motorcycle chains (Road, Track, Off-road)
• Bicycle and E-Bike drivetrains
• Sprockets, gears, and high-speed industrial transmissions
• Cables, tie-rods, bearings, joints, and couplings
• Marine components exposed to humidity and salt spray

Instructions for Use

For Motorcycle & Bicycle Chains:

1. Cleaning: Clean the chain thoroughly with a specific degreaser before application.
2. Preparation: Shake the can well.
3. Application: With the engine off, spray from 10-15 cm onto the inner part of the chain while slowly rotating the wheel for even coverage. Use the provided straw for precise distribution.
4. Setting: Wait a few minutes before riding to allow the adhesive film to stabilize.

Tip: Re-apply every 500-800 km, after every wash, or after heavy rain.

General Use:

1. Clean surfaces before application.
2. Shake well and spray at 10-15 cm in short bursts.
3. Use the straw for hard-to-reach areas. Re-apply periodically based on usage intensity.