Deosol A40C solvente sgrassante agli agrumi per lavaggio parti meccaniche motori e minuteria

DEOSOL A40C

Multi-Purpose Degreasing Solvent, high efficiency and material safety for mechanical parts and sealant removal

CONTENT
PACKING
Single
CODE
EDSOLC
DETAILS
A professional broad-spectrum degreasing solvent formulated with an enhanced aliphatic synergy and biodegradable plant-based esters. Composed of a controlled-evaporation mixture, it is engineered for cleaning mechanical parts, engines, and sheet metal affected by fatty substances or wax protectants. Compared to traditional solvents, the addition of the plant-based fraction provides exceptional detachment power on hard sealants (butyl and silicone residue). It leaves no persistent residues, emits no unpleasant odors, does not oxidize metal parts, and does not damage industrial painted surfaces (unless subjected to prolonged exposure).

Fields of Application
Mechanical industry, heavy mechanical workshops, automotive, marine, metal fabrication workshops, furniture industry, industrial and artisanal sheet metal work, metal roofing installation, and plant maintenance.

Main Applications
  • Industrial Washing and Degreasing: Rapid removal of neat oils, assembly greases, sludges, tar, and wax protectants from engines, gears, and hardware.
  • Removal of Butyl Sealants and Mastics (Sheet Metal Work): Dissolves and breaks down the sticky plastic matrix of butyl, assembly mastics, and double-sided tapes, making removal effortless.
  • Silicone Removal and Stripping: Infiltrates and softens the surface adhesion layer of hardened silicone beads on metal. Completely eliminates the dull residual haze remaining after mechanical cutting.
  • Pre-Sealing or Pre-Painting Cleaning: Ideal for manual washing of metal structures and sheet metal before applying new sealants or finishes.

Instructions for Use
Parts Washer Tanks (Workshop Brush Washers):
Clean disassembled mechanical components thoroughly one by one using a brush or by immersion, then blow with compressed air to accelerate evaporation.
  • Self-Cleaning Effect: It is recommended to add a small amount of water to the bottom of the tank (approximately 5% of the total volume). This allows mud, sludge, and heavy waste to settle at the bottom, purifying the liquid. Settled material can be periodically drained through the dedicated bottom release valve, keeping the solvent clear and ready for use.

Manual Application with Rag or Trigger Spray (Workshop and Sheet Metal Work): Soak a rag with the product or spray directly onto the surface to be degreased or cleaned.
  • For Oils and Greases: Apply to the surface and immediately wipe over with a clean cloth to completely remove all traces of dissolved oil.
  • For Butyl and Mastics: Allow the product to act for 1–2 minutes. The plant ester fraction breaks down the adhesive tenacity, allowing the rubbery paste to be wiped away with a cloth.
  • For Silicone Haze: Mechanically remove the bulk of the bead (using a cutter). Apply the product to the remaining residue, allow it to act, strip away, and clean the surface. Note: If extruding a new sealant immediately after, perform a quick final wipe with a dry cloth or alcohol to ensure perfect metal wettability.
OTHER FEATURES
  Suitable for industrial cleaning
  Suitable for nautical cleaning
  Suitable for engine and parts degreasing
  Use is possible with paintbrush
  For Parts Washer
YOU MAY LIKE THESE PRODUCTS
FILL OUT THE FORM BELOW TO RECEIVE FURTHER INFORMATION
(All fields marked with * are required)
  I agree to receive commercial communications and/or newsletter.
  * I have read the PRIVACY POLICY and I consent to the processing of personal information for the purposes indicated.