Pulitore per macchine vendemmiatrici e sgrassante universale

TEKNALL CLEANER

Grape Harvester Cleaner and Universal Degreaser

CONTENT
PACKING
Single
CODE
ETK
DETAILS
TEKNALL CLEANER is the specific formulation developed by Altur laboratories for the deep cleaning and decontamination of equipment used in the winemaking sector. The product is engineered to quickly break down and eliminate stubborn organic dirt, such as sugar residues, must, and tannic build-ups typical of the harvesting season.

Thanks to a high-efficiency formula with an alkaline pH, TEKNALL CLEANER acts as a high-performance universal degreaser for routine and extraordinary maintenance of agricultural and industrial machinery.

Technical Features and Intended Use
Viticulture sector and grape harvesters:
Used as a ready-to-use cleaner, it effectively breaks down organic sugar and tannin crusts on harvesters and picking equipment. The combined action of the formula and mechanical scrubbing restores surfaces without resorting to harsh solvents.
Professional universal degreasing: Beyond its specific use during harvest, the balanced mixture meets general degreasing needs for equipment and work surfaces, allowing the removal of heavy dirt at dilution rates ranging from 5% to 30% in water.

Directions for Use and Dilution
  • For grape harvesters (specific cleaning): Apply the product neat (ready-to-use) using a sprayer or wash mitt. Rub manually with a sponge or protective glove until organic residues are fully dissolved. Rinse thoroughly with a high-pressure water jet, preferably hot water, to optimize washing efficiency.
  • For universal degreasing: Dilute the product in water from 5% to 30%, depending on the level and nature of the dirt to be removed. Apply to the surface, allow to act for the necessary time, and rinse thoroughly with a pressure washer (preferably with hot water).


Frequently Asked Questions (FAQ)

What is the difference between use on grape harvesters and universal degreasing?
For removing sugar and tannic residues during harvest, the product must be used neat (ready-to-use). For general degreasing of other industrial or agricultural surfaces, it can be diluted in water from 5% to 30%, depending on the amount of dirt to be removed.

Can I use TEKNALL CLEANER on aluminium parts?
No. The product must not be applied to untreated aluminium, ergal, duralumin, or titanium, as its strong alkalinity (pH 13.9) could attack these metal alloys, oxidizing and darkening them.

Is it necessary to rinse with hot water?
Rinsing with a hot water pressure washer is recommended to speed up the dissolution of sugar residues and organic fats, ensuring an optimal final result.

As this is a high-performance product intended for professional use, it is recommended to verify material compatibility beforehand by conducting a test on a hidden area prior to the full treatment of the surface.
OTHER FEATURES
  PH: 13,5
  Indicated for high pressure hydro-cleaner
  Indicated for low pressure sprayer
FILL OUT THE FORM BELOW TO RECEIVE FURTHER INFORMATION
(All fields marked with * are required)
  I agree to receive commercial communications and/or newsletter.
  * I have read the PRIVACY POLICY and I consent to the processing of personal information for the purposes indicated.